Common Issues & FAQ

We get a lot of PM’s and emails with your requests to help fix problems regarding windows 7 loader. And now we will review the most common problems:

1. Check if you have installed KB971033 windows update if yes, delete it. This update is designed to detect loader so make sure it’s deleted from your system. If you install loader having this update you probably get not genuine error.

2. Many people get problems with MBR or Not Genuine Error (Black Desktop saying windows not genuine). Before installing loader you can use MBR Regenerator to reset windows back to 30 days trial. You find it easily on our website HERE.

3. If you have to verify with one of the offers and there is this error: “there are no offers for your country” please go to this link to download the file: http:// qwiklnk.com/WnL  (delete one space after http://).

4. Windows update service is not working.

windows update fix

Solution posted by one of our loader users:

Latest solution is to update windows manually downloading updates from here: http://www.wsusoffline.net and after that windows update will work automatically.

“Cause: probably Windows 7 bandwidth/servers were allocated to Windows 10, so it really takes HOURS until it finishes to check for updates. To install Ultimate + SP1 and takes 24-48 hours to display (today) 222+43 updates to install (after one separate first update KB976902).
Solution: wait or install manually KB3138612 and then your updates will be shown in 10-20 minutes (or more, but definitely faster than without it). It will take some hours until download and install (due to bandwidth resize for Windows 7) but please stop blaming loader for updates problems. It’s Microsoft fault.
Note: no need to restart the update service, it will only get worse (interrupts the check and then starts over). Just WAIT and updates will come!!!”

We noticed that microsoft maybe released update which stops windows update service from working, but we have a solution: open command line (cmd) in administrator mode and type “net stop wuauserv” without quotes to stop update service. Then type “net start wuauserv” this command restarts windows update service and you should get your updates now. Hope it works for you all!

Alternative is to use this clever microsoft tool which can fix many problems related to windows update: https://support.microsoft.com/en-us/mats/windows_update/en

We will add more solutions in the future..

 

Questions and Answers related to Windows 7 Loader

 

Q. Program status says “modified – Uninstall other cracks etc.”, what should I do?
A. Your options are: a) find a way to uninstall the other cracks b)download WAT Fix c) format had drive. Use Duck duck go search for wat fix.

Q. Why i lost activation after running Windows startup repair tool?
A. Startup repair is writing a new boot sector to your systems. Prevent this by using cmd as admin and write this: “bcdedit /set {default} bootstatuspolicy ignoreshutdownfailures”

Q. I use multiple boot with Windows 8 or 10 and  loader doesn’t work?
A. Boot into windows 8 ar 10 and open cmd as admin and write this command: “bcdedit /set {default} bootmenupolicy legacy”

Q. I installed loader but it says not activated what should i do?
A. Go to daz loader – advanced options tab and choose option to disable type 4 memory or use the legacy setting, then press install and reboot when required. You maybe also have to select the option to ignore the system current SLIC and/or revalidate online.

Q. I used loader in the past and it didn’t worked, what do I have to do?
A. If you ever loaded bootsec just press  uninstall to uninstall old loader. After that reboot pc and install newest version of daz loader from our site.

Q. I got this error message “Failed to add loader to the boot code”, what should i do?
A. Try disabling your antivirus and firewall programs because they can cause issues especially with hips integration.

Q. I have used other cracks or software and i think it messed something up in my system, can it be fixed?
A. Try to uninstall and revome other apps you were using and try to run this command: “sfc.exe /scannow” from cmd as an admin.

Q. I lost my activation while pc entered sleep mode how to prevent this from happening?
A. Open loaders advanced options, from there select to disable type 4 memory. After that try installing loader again and check if this fixed that. If not try disabling type 3 memory. If it still not working try enabling legacy settings.

Q. I got status “Unsupported partition table”, what is this?
A. You probably using GPT formated drive on a UEFI motherboard. Another option is locked OEM partition. You can fix these problems by fully formatting your entire hard drive to ntfs format.

Q. I got error: “Error finding your systems active partition”, what should i do now?

A. You need fully reformated hard drive. You can do this with apps like “[email protected] Kill Disk.” This error you get because your OEM partition is locked.

Q. I installed daz loader and pc can’t finish boot process, how to fix this?
A. Go to the loaders advanced options. There select disabling type 4 memory. After that try installing loader one more time and see if that helps. If it still not working them disable type 3 memory. Last resort is to use legacy settings.

Q. I installed activator after reboot it says still not activated. Also loader pops out this error: “BAD SLIC SIZE” or “BAD SLIC DATA”,  how to fix that?
A. First try by uninstalling loader, completely reboot your pc (you can even plug from socket). Go to loader advanced settings and select ignoring existing SLIC. After doing that just press install and reboot PC when required.

Q. My motherboard and windows on UEFI, but i format my hard drive to use MBR but still not activated. What you recommend?
A. Go to the UEFI menu and find secure boot, then disable it.

 

UEFI motherboards support

 

The activator don’t work when your hard drive using GPT format. The solution is to format your drive to use MBR.

From your BIOS select to boot the Windows DVD without UEFI, press and hold SHIFT and then press F10 and then enter this:

diskpart
list disk
select disk 0
clean
convert mbr
create partition primary
select partition 1
format fs=ntfs quick

Boot Windows 7 iso like you do always and then  installal Windows. After windows are installed then you can then install daz loader.

To force windows 7 boot without triggering UEFI use the Windows 7 USB/DVD Download Tool. Once the USB is created just delete bootmgr.efi from the USB and then try to boot from it.

 

Server 2012 (R2) problems and how to solve them

Starting with OS – Server 2012 range MS required the RSDP to be in read only memory. Because of this there are limitations.

* PC’s with already existing SLIC  data in their BIOS should work.
* Systems with an Intel CPU’s have succeeded before because they chipsets prone to lock picking.
* PC’s with an AMD CPU’ can get problems activating if they doesn’t have an existing SLIC in their BIOS.
* If the loaders cmd shows “v2.3” or “v2.2” but pc still not activated then you probably having problems with compatibility

—————————————————————————————————————————————-
To convert Windows Server 2012 from evaluation edition you should use this command:

DISM /online /Set-Edition:<edition ID> /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX /AcceptEula

Here is an example:

DISM /online /Set-Edition:ServerDatacenter /ProductKey:B8BRN-RUI6P-BVTBM-89P9Y-XQRTH /AcceptEula

Your pc probably have to be restarted 2 times before loader will do it’s job.
—————————————————————————————————————————————–

Recovery after failed bootup – BLACK SCREEN

Is Windows 7 are failing to boot after you installed the windows 7 activator newest version? Just try doing these steps:

  1. Boot up computer using your selected Windows 7  iso file.
  2. Press and hold your SHIFT key and after that press F10.
  3. Writing this should help “bootsect.exe /nt60 SYS /force” (just write without quotes).
  4. And finally restart your PC.

Attention! If steps you followed aren’t fixing booting problems you have to try using this command “bootsect.exe /nt60 ALL /force”. Make sure before using this command that all flash drives and memory cards are removed.

Also you can try holding the “R” key after your BIOS screen. If you press it at the right time then you’ll see a boot menu also there could be other options depending on your pc model. Boot and from menu select to booting without SLIC.

Good luck if you have any other issues write us and we will add them here!